higuys.
i have an ldk 100 asmu1e GS-90P 3.3A cpu card that crushed when a collegue tried to upgrade the firmware to 30P-39Da using ldk pcadmin version C.5Ad 2005.06.03
according to his report the upgrade started off just fine and completed but the cpu card never came out of the upgrading sequence. Leds LD1 to LD4 were continuously on and after about 30 minutes he switched the system off the back on. now the card is not switching on at all.
Question 1, is there a way to recover it and
Question 2, where did he go wrong with the upgrade?
i have an ldk 100 asmu1e GS-90P 3.3A cpu card that crushed when a collegue tried to upgrade the firmware to 30P-39Da using ldk pcadmin version C.5Ad 2005.06.03
according to his report the upgrade started off just fine and completed but the cpu card never came out of the upgrading sequence. Leds LD1 to LD4 were continuously on and after about 30 minutes he switched the system off the back on. now the card is not switching on at all.
Question 1, is there a way to recover it and
Question 2, where did he go wrong with the upgrade?