Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CRMN001 ERROR
- Thread starter BK5426
- Start date
- Thread starter
- #3
CRMN0001
High Call Register usage; Pcnt Used= p, Num Used= x, Num CR= y
More than p percent of the call registers (CRs) allocated in the system
are in use. There are y CRs allocated and x of them are in use.
This message prints when the number of call registers used is greater
than or equal to 80 % of the total number of call registers
configured.
If this error occurs regularly the number of CRs configured needs to be
increased, which requires a system initialization. If the percentage
reaches 99% call processing, error monitoring, or CDR may be affected.
Severity: Major
High Call Register usage; Pcnt Used= p, Num Used= x, Num CR= y
More than p percent of the call registers (CRs) allocated in the system
are in use. There are y CRs allocated and x of them are in use.
This message prints when the number of call registers used is greater
than or equal to 80 % of the total number of call registers
configured.
If this error occurs regularly the number of CRs configured needs to be
increased, which requires a system initialization. If the percentage
reaches 99% call processing, error monitoring, or CDR may be affected.
Severity: Major
- Status
Similar threads
