Hi everybody. I have a network of the company where it is installed a server running Windows 2003 server and I have a router 3COM OfficeConnect ADSL Wireless 11g Firewall Router. and i want to access the server of the company from my house using VPN. I have a private ip address that I have purchase from our ISP but I don't know how to create the VPN between my house and my company. So can someone help me please.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
creating VPN
- Thread starter skili100
- Start date
Are you plannign on running RRAS for VPN eablishment?
- Brandon Wilson
MCSE:Security00/03; MCSA:Security03
MCSA:Messaging00; MCP; A+
IT Pangaea (
- Brandon Wilson
MCSE:Security00/03; MCSA:Security03
MCSA:Messaging00; MCP; A+
IT Pangaea (
- Thread starter
- #3
you need to install RRAS (routing and remote access), then configure connection rules to allow access. Afterwards, you then need to set up the vpn connection on your system.
- Brandon Wilson
MCSE:Security00/03; MCSA:Security03
MCSA:Messaging00; MCP; A+
IT Pangaea (
- Brandon Wilson
MCSE:Security00/03; MCSA:Security03
MCSA:Messaging00; MCP; A+
IT Pangaea (
- Thread starter
- #5
If you are not comfortable or knowledgeable about installing and configuring RRAS, and opening ports on your firewall to allow the VPN traffic trough to the server, you can use a hosted VPN service such as that does not require RRAS or open firewall ports.
- Thread starter
- #7
please help me. I will explain to you. I have a server that has two networks card. one is connected to the switch, where is connected all the other computers, and the second card is connected to the router. the first card that is connected to the network has 192.168.1.50 as an IP address and the second has 10.0.0.2 as an IP Address and the router has 10.0.0.1 as an IP Address. and also I have an IP Address fix that i have bought from our ISP.
And in the server I have configured Routage and access distant. so I want to connect to the server from outside using VPN. how can I do
And in the server I have configured Routage and access distant. so I want to connect to the server from outside using VPN. how can I do
Here's a walkthrough for RRAS.
I read some of it and it seemed accurate....
- Brandon Wilson
MCSE:Security00/03; MCSA:Security03
MCSA:Messaging00; MCP; A+
IT Pangaea (
I read some of it and it seemed accurate....
- Brandon Wilson
MCSE:Security00/03; MCSA:Security03
MCSA:Messaging00; MCP; A+
IT Pangaea (
- Status
Similar threads
- Locked
- Question