Creating access rules for unique Ip

[excuseme]

I am trying to allow and forward HTTP traffic originating from one router 216.x.x.x to my virtual server on my network through a Pix506e. my servers IP looks like 192.x.x.x. Any one have a template and possibly intructions for creating this permit rule using the PDM? I am not very familiar with CLI.

thanks in advance.

 

[roblay22]

On the Pix you have to group your access rules according to interface so first you need to decide which interface the traffic will be origination from and which it will be going to. Once you've done that then you can configure the access rule under configuration in PDM. You'll want to add the rule and specify a mask of 255.255.255.255 for the ip address of your router to lock it down to that host.

Let me know how you get on.