Create or copy existing SIP extention

[foufata]

Hi,

I have couple of SIP extention created using the below command within my Siemens HIpath 4000

ADD-SBCSU:STNO=9000,OPT=FPP,CONN=SIP,PEN=1-1-85-0,DVCFIG=S0PP,COS1=90,COS2=90,LCOSV1=1,LCOSV2=1,LCOSD1=1,LCOSD2=1,PROT=SBDSS1,INS=Y,OPTIDX=10;

i am trying to use one of my SIP extentions within a 3rd party encryption device,

Unfortunately only one of created SIP extention is working using the 3rd party tecnology.

I dont know what is the diffrence between this SIP and the other ones.

How i can create or copy exactly the same working SIP into more extentions?

I heard that i can use the REGEN command to regenerate exactly the same working SIP but with pther number.

Can i have details on how i can do this?

SImply i have a working SIP extention and need to create copies of it.

Thx

 

[donb01]

In expert mode, REGEN-SBCSU for the extension number you want. You will receive a line of code (that will word wrap). Copy and paste that line down below in the command box, change the extension number and PEN number to your new ones and hit enter. The system will create MOST of a copy of that extension. If you did any tweaking of classmarks or other settings in the Assistant you will have to compare all that stuff.