Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CR8.5/Web fails to load

Status
Not open for further replies.

peteclen

Programmer
Oct 17, 2001
10
GB
On most PCs, our CR8.5 reports, displayed over the Web, are loaded and displayed with no problem. However, one or two PCs have failed to display the reports, giving just a blank grey screen with a red 'X' in the top left corner.

There are no obvious differences between these PCs and others which work fine. All are using the ActiveX viewer on IE5.

Anybody know what's going on and how to correct it?

Many thanks
 
You may want to check under Tools/Internet Objects/Settings & then objects and see if they might have an older viewer installed.....If they do, delete it and the correct one should download next time they view a report.

Also, do any of these users have Crystal installed on their machines?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top