fathermurphy
Technical User
Client broght in an HP Tower. It has an AMD Athlon 1.3, 256 meg of ram. The system boots to the HP logo screen and stops responding. I tried reseating all components, still locking up. If I hit the esc key I can get to the post screen, but after doing memory check it locks up. I'm thinking it has something do with the processor or cpu, as if I try to enter setup and check settings there, it just says entering setup, and does nothing. I don't have another processor or motherboard in stock to try those to see if thats the problem. So what I was wandering is if anyone here has experienced anything like this before. I'm not getting any beep codes on the post either.
Thanks in advance
Thanks in advance