Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CPU levels on CAT 6500

Status
Not open for further replies.

lobo66

IS-IT--Management
Nov 12, 2002
106
US
What is an acceptable CPU level on a 6513, and or when do I start raising a flag?
 
Sup2, Sup32, Sup720? MSFC installed? Running Hybrid or Native IOS?

 
What are you doing on the switch is something that needs to be reviewed.

Are you using it for routing? Multicast? IPX, etc..

Many thigns require CPU power. just giving a general answer is hard.
 
I wouldn't start getting worried until you are running over 75 percent on a constant basis
 
Most traffic is switched at the hardware level , if you ever get up to the 70% level you have something unusual going on that needs to investigated . Most traffic should never even hit the cpu .
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top