Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CPMG's Server Not working Rls 7.6

Status
Not open for further replies.

kkitkat69

Systems Engineer
Oct 22, 2019
9
PK
Hi All,
i had an issue with CPMG Server(Rls.7.6) not working and stating Red light on CP-Stat display. i have been trying but hard luck to reinstate. it seems some missing files on Linux as i guess below are some error getting on terminal.

Starting mount_srv: /etc/init.d/functions: line 489: 1690 Bus error [FAILED]
Starting patch management utility/etc/profile.d/linuxbase.sh: line 39: 2137 Bus error /usr/bin/perl -e 'use lib "/opt/nortel/base/lib"; use common_functions; exit is_debug_mode();'
-bash: line 1: 2148 Bus error (core dumped) /usr/bin/perl /opt/nortel/base/patchutil/bin/startup_patch_mngmnt > /dev/null
[FAILED]
Starting linuxbase_srv: /etc/init.d/functions: line 489: 2150 Bus error "$@"
[FAILED]
Starting appstartup: /etc/init.d/functions: line 489: 2152 Bus error "$@"
[FAILED]

Starting mount_srv: /etc/init.d/functions: line 489: 1692 Bus error "$@"
[FAILED]





Does anyone already seen this issue before ? pls help

Thank you in advance.
 
Does the MGC part of the card work is it registering? It sounds like a bad hard drive on the card to me. You could try to reload software and do a restore if you have a good backup but I would have a hard drive handy as it sounds more like the issue.
 
yes MGC is not registering as well getting err002 on screen. should i repaired Linux files or reload software from scratch ?

thanks for the replying.
 
I would say there are 2 options at this point if you have access to another CPMGS you could try to put the hard drive on another card and see if it will boot up. I am not sure you would be able to repair the files but also notice there are bus errors in the message so that's why trying another card may be a good option as well.
 
OK i will arrange another CPMG card and update you in a day or two accordingly.
thanks for your support
 
I'm pretty sure just swapping the hard drive and dongle to the new card will not work since the MAC addresses will be different.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top