Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CP100 Outdial using PRI 1

Status
Not open for further replies.

MontrealSoft

Vendor
Oct 5, 2002
302
CA
Hi,
I need to enable outdialing in the CP100 of my customer.
He is using a PRI (line 145 in his system) and the line pool access of his sets shows "pri-A".
To make a call, he presses Intercom then 9, then start dialing.

In the CP100, if I tell the system to use line 145, that doesn't work. And since I am not familiar with these PRI things, I'm kind of stuck here.

Thanks for any help.

MontrealSoft.com
 
line 145 is incomming only so you set his outdial to use pool or route
 
ok set as route and when yougo in mail box to set #to call start with a 9 then the # have fun
 
Thank's guy,
I set it up for "route" without anything else in the other fields and they dial 9 before the call, as mememary suggested, and customer is happy.

Have a nice day !

MontrealSoft.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top