CP100 Outdial using PRI 1

[MontrealSoft]

Hi,
I need to enable outdialing in the CP100 of my customer.
He is using a PRI (line 145 in his system) and the line pool access of his sets shows "pri-A".
To make a call, he presses Intercom then 9, then start dialing.

In the CP100, if I tell the system to use line 145, that doesn't work. And since I am not familiar with these PRI things, I'm kind of stuck here.

Thanks for any help.

MontrealSoft.com

http://www.montrealsoft.com

 

[MeMeMary]

line 145 is incomming only so you set his outdial to use pool or route

 

[MontrealSoft]

if the user only pool is IP-A, what should I enter in POOL: in the callpilot ?

Thanks,

MontrealSoft.com

http://www.montrealsoft.com

 

[MeMeMary]

Let me check I think either pool 1 or 9

 

[MeMeMary]

ok set as route and when yougo in mail box to set #to call start with a 9 then the # have fun

 

[curlycord]

Pool 1 or Route XXX (try Route 001 first)

=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[MontrealSoft]

Will try that and report the results.

Thank's !

MontrealSoft.com

http://www.montrealsoft.com

 

[MontrealSoft]

Thank's guy,
I set it up for "route" without anything else in the other fields and they dial 9 before the call, as mememary suggested, and customer is happy.

Have a nice day !

MontrealSoft.com

http://www.montrealsoft.com