CP 150 Locking Up on MICS 7.1

[allaboutphones]

We have CP 150 version 31.10.14.22 with about 112 mailboxes in use that keeps seizing up. When it seizes up, no one can access the voice mail system, and it cannot be accessed via the ethernet port. The system stays this way until it is re-booted. We have checked the power supply, and it is the new version (not hte old one that cause issues). This is causing us to reboot the system every 2-3 months. We are concerned that this is indicative of a larger issue that may foretell a system failure of some sort. Any ideas on what may be causing the issue, or is this somethat that happens with the CP150?

Any feedback would be appreciated.

 

[curlycord]

The odd one has this problem but not sure what is the cause but suspect the cabinet itself.


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[adix]

I have a CP150 with the same issue locks up and have to reboot.

 

[exsmogger]

Here's a shot in the dark. Since you have a lot of mailboxes, check to see if users are keeping their messages cleared out so you don't have a lot of storage time being wasted. I've seen GD mailboxes with hundreds of messages piled up because no one ever checks it.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952