help locsite
Usage : LOCSITE parameters
AUTORecall Permits migrated data sets to be recalled
automatically.
NOAUTORecall Prevents migrated data sets from being
recalled automatically.
AUTOMount Allows data sets on volumes that are
not mounted to be mounted automatically.
NOAUTOMount Prevents data sets on volumes that are not
mounted from being mounted automatically
DIRECTORYMode Treats each level of a data set as a directory.
Only the next lower level is used for MPUT or
server MGET, LS and DIR commands.
DATASetmode Treats all subsequent levels as a data set
(disables directory mode)
PDSTYPE=[{PDS|PDSE}] Specifies whether new MVS directories are
allocated as PDS or PDSE data sets. If no value
is specified, PDSTYPE will not be used when
allocating new MVS directories.
PRImary=value Specifies the amount of storage for the primary
allocation for new data sets.
SECondary=value Specifies the amount of storage for the secondary
allocation for new data sets.
DIrectory=value Specifies the number of directory blocks when
allocating a new PDS.
BLocks Specifies primary and secondary allocation
are in blocks
TRacks Specifies primary and secondary allocation
are in tracks.
CYlinders Specifies primary and secondary allocation
are in cylinders.
VOLume=value Specifies the name of a volume for allocation
If no value is given, the previous value is removed
and the system default volume list is used.
RECfm=value Specifies the record format for new data sets
LRecl=value Specifies the logical record length for new data sets
BLOCKSIze=value Specifies the blocksize for new data sets
DCbdsn=data_set Specifies that FTP should allocate any new data sets
with the same attributes as this data set. Data_set is
either a fully qualified data set name in quotes
or appended to the present directory name prefix
Qdisk=volume Lists the amount of space available on a volume
If no volume is given all the storage volumes
are listed
Unit=value Specifies the name of a unit for allocation
If no value is given, the previous value is removed
and the system default unit is used.
FILEtype=value Specifies filetype (SEQ or SQL)
SEQ is for standard sequential files, the default and
most common.
SQL is for submitting DB2 queries.
CHKptint=value Interval for generating Checkpoint markers.
ISPFStat Update statistics for PDS member
NOISPFStat Do not update statistics for PDS member
RESTGet Checkpoint data set will be opened for GET.
NORESTGet Checkpoint data set will not be opened for GET.
CHKPTPrefix=value Home, Local or Userid determines the HLQ of the
FTP.CHKPOINT file.
BLKsize=value Specifies the blocksize for new data sets
MIGratevol=vol Volume Serial Number of Migrated Files.
RETpd=value Retention period for newly created data sets.
RDw RDW from VB/VBS files is retained as data.
NORDw RDW from VB/VBS files is discarded as not data.
READTAPEFormat=value Format of input tape data sets. Valid formats are
F (for fixed), V (for variable), S (for spanned),
X (for lrecl X), and blank (unspecified).
DB2=value DB2 subsystem name (default is DB2)
SPRead SQL output sent in SPREADsheet format.
NOSPRead SQL output sent in REPORT format.
SQLCol= Column headings use N(ames), L(abels), or A(ny)
MGmtclass=name SMS Mgmt class for new data sets or *.
STOrclass=name SMS Stor class for new data sets or *.
DATAClass=name SMS Data class for new data sets or *.
WRAPrecord Wrapping the data into next record.
NOWRAPrecord Do not wrap the data into next record.
TRUNcate Truncated records will not be treated as an error
NOTRUNcate Truncated records will be treated as an error
and the file transfer will fail
ASAtrans Specifies that ASA control characters in ASA files
opened for text processing should be converted to
C control character sequences during file transfer.
NOASAtrans Specifies that ASA control characters in ASA files
opened for text processing should be transferred
as ASA control characters.
BUfno=value Number of access method buffers.
CONDdisp=disp Specifies the conditional disposition of a data set
as Catlg (catalogue) or Delete.
QUOtesoverride Specifies that single quotes around a filename
indicate that the filename should override the
current working directory rather than be
appended to the current working directory
NOQUOtesoverride Specifies that single quotes at the beginning of
a file name should be treated as part of
the file name
TRAILingblanks Returns trailing blanks for fixed
format data sets that are retrieved.
NOTRAILingblanks Removes trailing blanks for fixed
format data sets that are retrieved.
CHMod newmode filename Changes the permission bits of a HFS file.
newmode may be specified as an octal mask, or as
{who}{operation}{permission} where {who} is u, g,
o, or a, {operation} is +, -, or =, and {permission}
is some combination of r, w, x. filename is the
HFS file whose permission bits are changed.
UMask mask Specifies the octal UMASK to be used when
allocating new HFS files. UMASK will restrict the
setting of the permission bits.
WRTAPEFastio Allow tape write to use BSAM I/O
NOWRTAPEFastio Do not allow tape write to use BSAM I/O
ENcoding=value Specifies whether multi-byte or single-byte data
converson is to be performed on ASCII data transfers.
The values allowed are Mbcs and Sbcs for multi-byte
and single-byte, respectively.
MBdataconn=value Specifies the conversion table names for the
data connection when ENcoding has a value of
MBCS. 'value' is a pair of code pages with
the format (file_system_cp,network_transfer_cp).
SBDataconn=value Specifies the translation tables for the data
connection. 'value' may be a pair of code pages (cp)
with the format (file_system_cp,network_transfer_cp),
the name of an MVS data set or HFS file that contains
the translate tables, or the string FTP_STANDARD_TABLES
Omit '=value' or give value of * to reset.
DBSUB Enable substitution for double-byte data transfer
NODBSUB Disable substitution for double-byte data transfer
SBSUB Enable substitution for single-byte data transfer
NOSBSUB Disable substitution for single-byte data transfer
SBSUBChar=value Specifies the substitution character for single-byte
data transfer
UCSHostcs codepage Specifies the EBCDIC codepage to use
for conversion to/from UCS.
UCSSub Specifies that the EBCDIC substitution character
will be used to replace any Unicode character that can
not be converted. Data transfer will continue.
NOUCSSub Specifies data transfer will be terminated if any
Unicode character can not be successfully converted.
UCSTrunc Specifies data transfer will continue even if EBCDIC
data is truncated during Unicode conversion.
NOUCSTrunc Specifies data transfer will be terminated if the
logical record length of the receiving data set is
too small to contain the data after conversion from
Unicode to EBCDIC.
FWFriendly Data connections for client are firewall friendly.
NOFWFriendly Data connections for client are not firewall friendly.
SECUREIMPlicitzos Client will initiate TLSPORT security after the initial 220 reply from the server. Required to login to the zr
NOSECUREIMPlicitzos Client will initiate TLSPORT security before the initial 220 reply from the server
