Coverage path loop back

[hiall001]

I have a very silly question..I have 4 stations added in a Coverage path..All I want is a repetative cycle of bouncing.

Eg In cov pa , station 123---Staion 234---Station 345.
If 345 does not pick, the cycle should be repeated..( I tried putting in a X ported station with same coverage path, that we are discussing ) in the nect point, but that doesnt work...In the trace the last point ring and rings..

Thanks,

 

[steeltown89]

Add a coverage remote to the coverage path ("change cover remote"). Put 9 then the first phone number that was originally called. Yes it will dial out and back in. Or you can setup a coverage answer group that will ring up to 8 phones simultaneously.

 

[hiall001]

Hi..
Many thanks for this good solution.
Sorry but I have put an alternative in place because of urgency.
What I have done id , created a VDN and the VEC routing the call to fist station of cov pa. The last point of the Cov pa is the VDN number..
and again in the cov path of first number I have put one more cov path that has the second station of firstcov path as first station.Ya a bit silly one but it helped..

Thanks..