COV P Time of day

[G3rtech]

Can someone help me please? I have stations assigned in COV P 28 and 29. All I want is for calls that goto COV P 28 to route to 29 (Fri. 17:00 to 17:30.) The documentation threw me for a loop.

TIME OF DAY COVERAGE TABLE: 2

Act Cvg Act Cvg Act Cvg Act Cvg Act Cvg
Time Path Time Path Time Path Time Path Time Path

Sun 0:00 : : : :
Mon 0:00 : : : :
Tue 0:00 : : : :
Wed 0:00 : : : :
Thu 0:00 : : : :
Fri 0:00 : : : :
Sat 0:00 : : : :

Should it look like this??

Sun 0:00 : : : :
Mon 0:00 : : : :
Tue 0:00 : : : :
Wed 0:00 : : : :
Thu 0:00 : : : :
Fri 0:00 29 17:00 17:50 : :
Sat 0:00 : : : :


Gary L. Smith
Telephone Systems Engineer
The University of Mississippi
Telecommunications Department

 

[G3rtech]

I meant 17:30 in the last screen shot + I already have COV=t1 assigned to my stations.

Gary L. Smith
Telephone Systems Engineer
The University of Mississippi
Telecommunications Department

 

[dfalken]

It Should look like this

Sun 0:00 28 : : : :
Mon 0:00 28 : : : :
Tue 0:00 28 : : : :
Wed 0:00 28 : : : :
Thu 0:00 28 : : : :
Fri 0:00 28 17:00 29 17:30 28 : :
Sat 0:00 28 : : : :

Here I'm specifying 28 to be the coverage path on all days except Friday from 5 to 5:30. Then you have to put in 28 again to switch back to that one.

 

[G3rtech]

Hummm. I tried this for this time frame 16:00 - 16:30 and it don't work. Does COV Time of day need to me activated in my switch?

Gary L. Smith
Telephone Systems Engineer
The University of Mississippi
Telecommunications Department

 

[G3rtech]

I got it finally. I made a Coverage Time of Day Table 1. Sent calls to COV P 28 for a while then to 29 for a bit then to voice mail. It works pretty sweet. In the coverage path 28 I had to set DND/COV in and out to "Y" before it would work properly..


Gary L. Smith
Telephone Systems Engineer
The University of Mississippi
Telecommunications Department