We are using Networker server 6.1.1 on Win 2000 server - with ATL library.
I have to recover about 15 GB of data to our Netware client.
When server reads the first tape after recovering about 4 MB of data the drive goes into cycle and following messages can be seen:
"\\.\Tape0 moving:fsr 167:The semaphore timeout has expired"
"Media emergency:could not position ... to file ...record ..."
I have checked the drive, the HW test shows no error. Our vendor tested the whole library without any errors from tape drives.
Any tips are welcome.
Many thanks
Josef
I have to recover about 15 GB of data to our Netware client.
When server reads the first tape after recovering about 4 MB of data the drive goes into cycle and following messages can be seen:
"\\.\Tape0 moving:fsr 167:The semaphore timeout has expired"
"Media emergency:could not position ... to file ...record ..."
I have checked the drive, the HW test shows no error. Our vendor tested the whole library without any errors from tape drives.
Any tips are welcome.
Many thanks
Josef