Corrupted IP Adresses on a SSC

[kirchenlo]

Hi

I have a strange problem on a Small Systems Controller on Release 25.40B. The problem is that the IP addresses are corrupted. That means, I create a new host in LD 117 and do as well the chg elnk active command. But as soon as I enable the ELNK in 137 it show not my host but it activates the SECONBDARY_ENET.

Any idea?

 

[3tdp33ler]

Check an active route in LD 117.
Try to disable and reenable it.

 

[MagnaRGP]

Are you doing an update DBS before activating?

 

[kirchenlo]

Yes I do. I can do what ever I like, even by resetting everything to default, as soon as I do a enl elnk in LD 137 the system acivates the SECONDARY_ELNK host and not my configured one.

I already deltet the inet.db file and INIT the PBX to get a proper clean inet.db file but no change.

 

[phones1]

show us the process you are following so we can make sure you are doing it in the right order

Remember if it doesn't work hit it harder

Scott UK