Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Corebuilder 9000/4007 1
- Thread starter johnccc
- Start date
-
1
- #2
Hi Johncc,
The EME module for the CB9000 is working with the same way than CB5000 management module.
There is a procedure to restore default configuration.
When your login prompt appears you have to enter :
login : FORCE
password : FORCE
Push the EME reset button in the next 3 seconds (not more)
When the product restart, after the test messages, the following texte appears :
NVRAM not initialized or corrupt. Restoring factory default.
You can enter with admin as login, no password required.
Regards,
Luc.
The EME module for the CB9000 is working with the same way than CB5000 management module.
There is a procedure to restore default configuration.
When your login prompt appears you have to enter :
login : FORCE
password : FORCE
Push the EME reset button in the next 3 seconds (not more)
When the product restart, after the test messages, the following texte appears :
NVRAM not initialized or corrupt. Restoring factory default.
You can enter with admin as login, no password required.
Regards,
Luc.
Hi !
Got similar probs ...
I´ve an 3com Superstack II 9300 2-LX/10-SX (3C93011) SWITCH.
My Problem is: I could not login to reconfigure. My pal is walk out around the world and the 3com-support is over, because the machine was bought from 2001, and it´s to old since registration (just 2-year-free-support-help).
They gave me the offer to pay lot of money for help me here. - No thanks ! I haven´t !
Here are all my tried backdoors w/o effect (used serial-console):
adm/(none)
admin/synnet
admin/admin
admin/(blank)
admin/nopass
debug/synnet
write/synnet
... always "incorrect password" !
--------------
and:
root/(blank)
root/manger
security/(blank)
security/security
manager/manager
recover/recover
tech/tech
monitor/monitor
3comcso/RIP000
force/force
... always ".. is not a valid access level"
and here is NO reset-button on my machine ...
Maybe anyone got a quick idea ?! The delivered handbooks (the customer+admin handbooks) have no details for this case...
Does anyone have any idea or answer ?!
Greetings,
Phil (cloonie)
Got similar probs ...
I´ve an 3com Superstack II 9300 2-LX/10-SX (3C93011) SWITCH.
My Problem is: I could not login to reconfigure. My pal is walk out around the world and the 3com-support is over, because the machine was bought from 2001, and it´s to old since registration (just 2-year-free-support-help).
They gave me the offer to pay lot of money for help me here. - No thanks ! I haven´t !
Here are all my tried backdoors w/o effect (used serial-console):
adm/(none)
admin/synnet
admin/admin
admin/(blank)
admin/nopass
debug/synnet
write/synnet
... always "incorrect password" !
--------------
and:
root/(blank)
root/manger
security/(blank)
security/security
manager/manager
recover/recover
tech/tech
monitor/monitor
3comcso/RIP000
force/force
... always ".. is not a valid access level"
and here is NO reset-button on my machine ...
Maybe anyone got a quick idea ?! The delivered handbooks (the customer+admin handbooks) have no details for this case...
Does anyone have any idea or answer ?!
Greetings,
Phil (cloonie)
- Status
Similar threads
