Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
core outputs for terminals on 4.5 succession
- Thread starter recovered
- Start date
911guru
Programmer
- Nov 10, 2007
- 437
CS 1000 4.50 comes in a few different hardware options.
Option 11C Cabinet style (Wall mounted)
There is a DB-9 to (3) DB-25 cable that is attached to the backplane on the left
Option 11C Chassis style (19 inch rack mount)
There is a DB-9 to (3) DB-25 cable that is attached to the back of the unit on the left (looking at it from the back)
Option 61C/81C style (free standing pedestals)
On the back of each core there are connectors in the rear of each of the core cabinets. These are marked J23 and J24.
This is all fully documented in the NTPs for each machine type as well as information about setting port speeds, etc. SUggest you give them a read.
911Guru
Option 11C Cabinet style (Wall mounted)
There is a DB-9 to (3) DB-25 cable that is attached to the backplane on the left
Option 11C Chassis style (19 inch rack mount)
There is a DB-9 to (3) DB-25 cable that is attached to the back of the unit on the left (looking at it from the back)
Option 61C/81C style (free standing pedestals)
On the back of each core there are connectors in the rear of each of the core cabinets. These are marked J23 and J24.
This is all fully documented in the NTPs for each machine type as well as information about setting port speeds, etc. SUggest you give them a read.
911Guru
- Thread starter
- #3
acewarlock
Technical User
recovered: I see your new so if you really want to thank someone for helping you, look in the lower left hand corner of that persons help post and click on the
(thank 911guru for this valuable post) and give him a Star.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
(thank 911guru for this valuable post) and give him a Star.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
- Status
Similar threads
- Locked
- Question
