COR for site A using site B Trunks

[mabbab]

Hi

I have 2 3300's linked via IP Trunks.
Site A has SIP trunks Site B has no Trunks, so it uses Site A's Trunks.

How Does Site B's COR work?
In other words i want to have separate out dialling for each site.
As i understand it if site B dials 907XXXXXXXXX
this will follow its own COR first but then Site A's COR will apply.

Clear as Mud?
thanks in advance

 

[Mitelmatt]

What software release are you on?

How come your using SIP trunks and not Minet?

 

[kwbMitel]

The call out of site A from site B will follow the COR of the trunk not the set.

If you want the Site B sets to be flexible in their restriction you need to set up multiple routes to site A with different COR Groups much like you would on outbound to PSTN.

This would retrict calls from site B before seizing the IP trunk.



*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[mabbab]

Thanks for replies guys

i am on level 8.0 latest release ur4 i think.
Im using SIP trunks as these are my connection to the outside world - no other lines... isdn ..BRI...etc

I will try applying set COR to Trunk COR as per KWP

thanks again