Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Copying AA recordings
- Thread starter Neillsun
- Start date
The recordings are still there
C:\Program Files (x86)\Avaya\IP Office\Voicemail Pro\VM\WAVS
you just have to pick it from the recordings in there
Joe W.
FHandw, ACSS (SME), ACIS (SME)
“This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter
C:\Program Files (x86)\Avaya\IP Office\Voicemail Pro\VM\WAVS
you just have to pick it from the recordings in there
Joe W.
FHandw, ACSS (SME), ACIS (SME)
“This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter
Not if this is Embedded, and I think it is. (VM modules would keep the wave file intact on rename.)
Try renaming it back
Kind regards
Gunnar
__________________________________________________________________
Hippos have bad eyesight, but considering their weight, it’s hardly their problem
Try renaming it back
Kind regards
Gunnar
__________________________________________________________________
Hippos have bad eyesight, but considering their weight, it’s hardly their problem
intrigrant
Systems Engineer
If it is embedded then there is a good chance the recordings are still on the SD card.
Use the build in filemanager in Manager software and look at the details of all recordings, it will show the type of recording ( AA or VM ) and the name of the AA or User.
Then with a hex editor you can change the name of the AA, erase/rename the current one and send the modified back to SD, restart the SD card using SSA.
Use the build in filemanager in Manager software and look at the details of all recordings, it will show the type of recording ( AA or VM ) and the name of the AA or User.
Then with a hex editor you can change the name of the AA, erase/rename the current one and send the modified back to SD, restart the SD card using SSA.
amriddle01
Programmer
Well you have at least 24hrs, before housekeeping will bin them off for good....
intrigrant
Systems Engineer
hurry hurry, this wouldn't be a problem if you make backups after changing the announcements ( remove the SD card and dump everything on your harddrive )
- Thread starter
- #7
I am using embedded voicemail.
The only files I can find on the SD card that look close are in the System/Dynamic/LVmail folder. All CLP files, but with the right info in the 'Announcement Data' info box on the right.
Luckily it was only one announcement..
The only files I can find on the SD card that look close are in the System/Dynamic/LVmail folder. All CLP files, but with the right info in the 'Announcement Data' info box on the right.
Luckily it was only one announcement..
amriddle01
Programmer
The .clp files are the announcments, if you post it I can put it back to .wav and then you could upload it again
- Status
