Copy DB from one SSC card to another 1

[BkMesser]

Hi All,

I have a release 4.5 Opt. 11. We are out of ISM's for analog phones on it and need to add more.

I have another 4.5 SSC card that has plenty of licenses.

Is there a way to copy the database from the SSC Card (that doesn't have enough licenses) to the SSC card that does??

Or am I going to write a bunch of scripts?


Thanks

 

[KCFLHRC]

I think in LD 143 you can type UPGRADE and restore only the database. It may error out on you though since within the backup you are restoring there will be a serial #, that may be the gotcha. Easy enough to try though

 

[mikepbx1]

First "archive" the database (not a backup), as that way there's no S/N mashed with it. Then restore this archive on the other SSC. All done in LD 143: UPGRADE - Utilities.

http://pbxbook.com/meridian/maint/archive.html

http://pbxbook.com

 

[Firebird Scrambler]

Yes, it can easily be done. You can even install an older software database into one OK as long as the ISM are the same or greater.

The only problem you might have is if the feature set is different.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[BkMesser]

Thanks all.. I used the procedure from the link that mikepbxb postes and it worked fine.