Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
copy config file for cisco router 3
- Thread starter ncc1701d
- Start date
-
3
- #2
Get a TFTP server and load it on a windows system. You can use the one that comes from Cisco. Or the one that I use....
Enter into your router, go to the Global config and type in this....
copy run tftp
it will then ask you where to copy the file to. (host)
the file name (what name it will copy it as) and to confirm (Y) This will then copy your running config to the system you are running the TFTP Server on......
david e
*end users are just like computers, some you can work with...others just need a simple reBOOTing to fix their problems.*
Enter into your router, go to the Global config and type in this....
copy run tftp
it will then ask you where to copy the file to. (host)
the file name (what name it will copy it as) and to confirm (Y) This will then copy your running config to the system you are running the TFTP Server on......
david e
*end users are just like computers, some you can work with...others just need a simple reBOOTing to fix their problems.*
Solar winds also do a free TFTP server. I have found it very easy to install and work with.
tftpd32.exe from is another tftp program. I like better than the solarwinds because it's lighter(about 700K.
- Status
