copy all button and line assignments from one set to another. 1

[soapcommando]

I am using a Nortel Meridian system with Norstar M7324 hand sets. I need to copy the button setup from one set to another. Can someone please guide me to the proper place to accomplish this?

Thanks

 

[PERRYPJ]

YOU MAY WANT TO POST THIS ON THE NORSTAR FORUM

OLD ROLMEN WORKING ON NORTELS

 

[soapcommando]

It is a Meridian system. I have tried posting it in the Norstar Forum, but apparently these systems are quite different. Nobody in that forum has provided me with any information that I can apply (Menu Selections Provided Do Not Exist In My System). I have logged in through my phone set and cannot find the menu selection that allows me to copy the button assignments from one set to the other.

I have a set that has a line assigned imporperly, and do not know how to change it. All I want to do is copy a known good setup and apply it to the misconfigured phone.

If anyone can help me through this, I would be most greatful.

Thanks again.

 

[RCorrigan]

Which Meridian System ?

<Do I need A Signature or will an X do?>

 

[hawks]

You have a NORSTAR system go to the other forum. I'll see you there.

 

[soapcommando]

I may be all wet on this, but here goes..

NT7B53FA-93 Rel 08C

I am no expert on telephony systems, so if I am indeed in the wrong place please forgive me.

X will work fine.

Bill

 

[techman3030]

a 7324 is a Norstar phone. You need to check your system to see what model it is (MICS, CICS, 0x32, etc.) and someone on the Norstar forum will be able to help you.

 

[soapcommando]

Thanks for tolerating my ignorance...