I've got a question for all you Meridian gurus. The system is an Option 11. I have 12 new add-on module's to install on 12 2616's. I know I can copy the entire TN to another TN but I don't want to out every phone because they can't be down, even for a split second. The key programming of the AOM's will be the same so my question is, is there a way to copy the AOM key programming from one phone to another? Or am I stuck typing in every key for 12 AOM's? Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Copy add-on module key programming?
- Thread starter ToMaC82
- Start date
tnphoneman
Vendor
You can only copy on a new set. They will be down for a split second on the last enter key stroke. If they are on the phone they will get cut off.
Use procomm to create a script. Click on the camcorder button and record you programming the first set. You will have to make some adjustments but it will save all that typing.
Use procomm to create a script. Click on the camcorder button and record you programming the first set. You will have to make some adjustments but it will save all that typing.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question