fabianoboscatto
IS-IT--Management
I would like a simple Cook Book of how to do a NAT using Firewall-1.
I want that all my 10.x.x.x network use a unic IP.
Thanx....
I want that all my 10.x.x.x network use a unic IP.
Thanx....
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cook Book
- Thread starter fabianoboscatto
- Start date
- Status
Hi,To hide all your 10.X.X.X addresses :
-create a new network object : 10.0.0.0 / 255.0.0.0
-go to the properties of this object,to the "NAT" tab
-select "add automatic address translation rules"
-select translation method "hide"
-in the "hiding ip address" field,enter the official IP
address you want to use to hide the 10.X.X.X network behind
-compile the rulebase
-create a new network object : 10.0.0.0 / 255.0.0.0
-go to the properties of this object,to the "NAT" tab
-select "add automatic address translation rules"
-select translation method "hide"
-in the "hiding ip address" field,enter the official IP
address you want to use to hide the 10.X.X.X network behind
-compile the rulebase
- Status
Similar threads
- Locked
- Question