convert calls

[suzytek]

in option 1c
when office (1) convert his ext. to office (2) he dial 653 then the ext. of office (2).
if the office (1) forget to do that
can i convert from the software
thank you

 

[johnpoole]

in switch 2, if the dn is listed in the vacant dn table.

ld 20
prt
ludn

then you can build a dsc (distant steering code) that allows the user (from b) to just dial the switch a dn, same as a local dn.. you can do ranges, for instance.. switch a has all dn's 4000 to 4999, b has 5000 to 5999, so in 87

new
0
cdp
dsc
5
rli 5

then in 86 build a new rlb that assigns a frl and puts the numbers on a route.. then in switch b build a dsc to send all numbers starting with 4 to the far end.. you can send one number at a time or 1000, 100 or 10 numbers.. i can post the code or you can search for post containg cdp.. either way i never force a user to dial the acod plus the dn

john poole
bellsouth business
columbia,sc

 

[suzytek]

sorry sir
i mean by ext. ( extension number ) in the same switch

(how can i convert the call from extension number 3100 to another extension number 3200 ) by software not from the sets.

 

[lretrievers]

Are you trying to forward the calls from one phone to another?

 

[suzytek]

yes sir
thank you for your operation

 

[suzytek]

any one help

 

[TAnselm]

I'll take that these are analog phones and that 653 is your spre code.
There is no way to activate call forward from the switch terminal. The only thing you could do is create and assign Station Control Passwords and then you can forward his phone remotely from another phone.

 

[suzytek]

Thank s for your reply

If you please write the steps to do that

 

[johnpoole]

chg
500
4 0 0 0
echg yep
cls fna
fdn 3001

that will forward the analog station on tn 4 0 0 0 to dn 3001, after the rco is met..

to make it foward without ringing search this forum for remote call forward.. i can't post that from memory but heres the short course..

ld 57
prt
fcc
all.

that will tell you the rcfw feature code

on the set put any 4 digits on scpw, that is the station password.. in my 81 i dial the fcc #2, then the scpw then the dn plus the forward to station

john poole
bellsouth business
columbia,sc

 

[lamasu]

Friends,

It is becoming increasingly necessary to allow people to remote call forward phones. I do realize that DISA is necessary. Does anyone have the exact process needed to do this. I tried to look at the NTP's and could not get a clear picture.

Thanks in advance