Convert calling number

[baldanondo]

Hello,

I'd like to hide some extension numbers of the MD110 so that when they call outside, their own extension is not be seen. I want to hide those extensions with the operator's number

For example:

In a department where extension 1900 is the operator and 1901, 1902, 1903..are the other members. I want that when 1902, 1902 ...make calls outside the number that they show is the 1900 (the operator's number)

We are using BC12

Thank you and regards

 

[mundus]

Hi'
NUTRI:ENTRY=1902,CNVTYP=1,NUMTYP=10,TRC=4,PRE=1900;
If you want to exclude this number conversion from other route or dest then also use ROU=x or TARDST=x + ADC d24=1 in RODDI in NUTRI.

 

[baldanondo]

Hello,


Thanks for the quick answer. And how is is possible to see the number conversions currently done in the PBX and which is the command to undo de conversion

Regards

 

[mundus]

Print:
NUTRP;

Erase:
NUTRE;ENTRY= ,CNVTYP= ,NUMTYP= ;