Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Control Codes for Lexmark Z12
- Thread starter rym
- Start date
This is a Windows only printer, so you cannot control it from DOS programs, I check it directly in the Lexmark web site, and is very specific on that matter: the Z12 is a windows ONLY pinter. It does not have PCL compatibilty nor ESC/P or some other printer control codes so, Clipper cannot print to it.
I've a Lexmark 3200 which is also a "Windows printer" but the drivers has some compatibility for DOS. I can print via the Win driver only. Still, I creqate a text file (SET PRINTER TO ABC.TXT) and copy the file to the printer.
No problem at all...
ST
No problem at all...
ST
- Status
Similar threads
- Question
- Locked
- Helpful tip
- Locked
- Question