Contivity 1100 configuration help

[owee69]

I know this is more of an IP question, but the setup is to connect IP phones to a BCM, and I am getting no response on the Nortel Networking solutions forum.

I am setting up 2 Contivity 1100's, one at each end of a point-to-point T1 for data traffic. I need a really simple setup (no VPN, etc.), but I can't seem to get it to work. On one, I have configured:

LAN interface: 192.168.11.1 255.255.255.0 "private"
WAN interface: 192.168.10.2 PPP T1 "public"
default route: 192.168.10.1
RIP enabled on all
no firewall

...and on the other which has existing internet access:

LAN interface: 192.168.1.4 255.255.255.0 "private"
WAN interface: 192.168.10.1 PPP T1 "public"
default route: 192.168.1.1 (the existing Sonicwall firewall)
static route: 192.168.11.0 to 192.168.10.2
RIP enabled on all
no firewall

The problem is that, with my laptop plugged straight into the LAN interface, I can't even ping the WAN PPP IP of the Contivity I am plugged into.

I'm sure there is some sort of firewall setting to allow public to private traffic, but I cannot find it anywhere.

 

[bcmpimp]

Do you have the stateful firewall and advanced routing in the COntivity's?

 

[owee69]

I have license keys for both if I need them.