Contivity 100 config - port to private IP

[surround1972]

We have a Nortel Networks Contivity 100 switch. I need to access a computer in the LAN from the outside using terminal.
How do I configure the Contivity to forward a request on port 3389 (terminal) to the private IP of the computer I want to access? Thanks in advance.

 

[ZZtops]

I believe you need to do a nat add
telnet to the box
type config
copy this information for reference to a notepad document

nat add 1.1.1.1:2222 2.2.2.2:2222 tcp
where 1.1.1.1 is the external/public ip
where 2.2.2.2 is the internal/private ip
where 2222 is the port you want to use
tcp is the protocol which is needed (udp,ip,tcp whatever)