Assuming it's not coincidental that a particular phone number is always busy, is there ANY way my PBX could deny calls to a particular phone number when calls to other numbers in the same NPA/NXX CAN be completed? example: calls to 212-555-1212 always complete but calls to 212-555-3434 always, ALWAYS get a busy signal. Calls from cell phones can complete the call. Nothing but 976 is blocked in the SDRR table. thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
constant busy on one number
- Thread starter coniglio
- Start date
Nortellian
Technical User
sounds like your service provider has something out of place. give em a call.
- Thread starter
- #3
acewarlock
Technical User
It could be your switch, check Ld 90 and prt that NPA and see if there are any Deny's for that number.
Just dial out on a maintenance phone, bypass all your BARS/NARS. Get through, look harder, don't get through tell them.
Turn on messaging to see if you are getting out, and what messages you are getting.
Can you use POTS lines from your location to dial the number?
Post the number and we can all flood test calls to it.
John
Turn on messaging to see if you are getting out, and what messages you are getting.
Can you use POTS lines from your location to dial the number?
Post the number and we can all flood test calls to it.
John
- Status
Similar threads
- Locked
- Question
