connectivity between 2 VLANs

[elvis123456789]

i`m using cisco 878.
i`ve created 2 different vlans "!
interface Vlan1
ip address 192.168.1.100 255.255.255.0

!
interface Vlan2
ip address 192.168.2.100 255.255.255.0 "

i want connectivity between 2 VLANs

???

 

[North323]

if you have two physical interfaces, should have no problem, should know about physically connected networks. whats the rest of your config look like?

 

[elvis123456789]

yes , it has physical interfaces
any help example ?

 

[North323]

post a scrubbed config

 

[VinceWhirlwind]

Your next step is to assign physical interfaces into those VLANs.

 

[m5runner]

you can either use static routes or a routing protocol like OSPF. what you want to do is tell 1 VLAN about the other and what interface to find the other VLAN. for example:

conf t
ip route 192.168.1.100 255.255.255.0 fa0/0

 

[VinceWhirlwind]

He doesn't need to tell one VLAN about the other - they are routed from virtual interfaces on the same L3 device.

 

[burtsbees]

They are directly connected. Do as Vince says. He is right. He is always right. So am I. Well, I was wrong about something back in '78, but I never admitted it. Mathematically, the two wrongs make a right.

/

tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!

 

[m5runner]

Didn't see that it was on the same device. My apologies.