Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Connection but no voice between 500 set and i2002Set

Status
Not open for further replies.

Bleuvert

Technical User
Jan 11, 2006
38
CA
Hi,
I have a curious problem.I have two signaling server CS1000 and 2 MC-32 Card. I can call a 500 set with an i2002. Communication was establish, but no set can hear voice. It's the same thing with a 500 calling an i2002. And when a person call from outside trough the callpilot, he can reach the 500 and the i2002, but the voice can be heard only on the 500 set.

Thank's for your precious help
Bleuvert
 
Your UDP voice packets are being blocked/dropped somewhere between the IP Phone 2002 and the MC32 card.
 
Check if the units of the MC32 card are registrated.

See response below:
If your response is different please post the response here.

LD 32
.STAT 4 0 3 (i.e.)
00 = UNIT 00 = IDLE (TRK)(IPTN REG )
01 = UNIT 01 = IDLE (TRK)(IPTN REG )
02 = UNIT 02 = IDLE (TRK)(IPTN REG )
03 = UNIT 03 = IDLE (TRK)(IPTN REG )
04 = UNIT 04 = IDLE (TRK)(IPTN REG )
05 = UNIT 05 = IDLE (TRK)(IPTN REG )
06 = UNIT 06 = IDLE (TRK)(IPTN REG )
07 = UNIT 07 = IDLE (TRK)(IPTN REG )
08 = UNIT 08 = IDLE (TRK)(IPTN REG )
09 = UNIT 09 = IDLE (TRK)(IPTN REG )
10 = UNIT 10 = IDLE (TRK)(IPTN REG )
11 = UNIT 11 = IDLE (TRK)(IPTN REG )
12 = UNIT 12 = IDLE (TRK)(IPTN REG )
13 = UNIT 13 = IDLE (TRK)(IPTN REG )
14 = UNIT 14 = IDLE (TRK)(IPTN REG )
15 = UNIT 15 = IDLE (TRK)(IPTN REG )
16 = UNIT 16 = IDLE (TRK)(IPTN REG )
17 = UNIT 17 = IDLE (TRK)(IPTN REG )
18 = UNIT 18 = IDLE (TRK)(IPTN REG )
19 = UNIT 19 = IDLE (TRK)(IPTN REG )
20 = UNIT 20 = IDLE (TRK)(IPTN REG )
21 = UNIT 21 = IDLE (TRK)(IPTN REG )
22 = UNIT 22 = IDLE (TRK)(IPTN REG )
23 = UNIT 23 = IDLE (TRK)(IPTN REG )
24 = UNIT 24 = IDLE (TRK)(IPTN REG )
25 = UNIT 25 = IDLE (TRK)(IPTN REG )
26 = UNIT 26 = IDLE (TRK)(IPTN REG )
27 = UNIT 27 = IDLE (TRK)(IPTN REG )
28 = UNIT 28 = IDLE (TRK)(IPTN REG )
29 = UNIT 29 = IDLE (TRK)(IPTN REG )
30 = UNIT 30 = IDLE (TRK)(IPTN REG )
31 = UNIT 31 = IDLE (TRK)(IPTN REG )

Jacco.
 

Problems was solve, but the reasons for this problem was'nt clearly found, many causes can be guilty for that. I Came back with details soon.

Thank's Friend for your precious help !

Bleuvert
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top