Hi,
Am trying to connect two Superstack 3 3300 SM 24pt switches in separate buildings.
They both have software 2.66 and 1000 base sx Mt-RJ port on front.
Connecting the two gigabit ports together just gets the status light to flash on and off every 2 seconds or so and no traffic flow.
Is what i'm trying to do feasible and if so, has anyone got any idea of the problem?
Ta,
Rich
Am trying to connect two Superstack 3 3300 SM 24pt switches in separate buildings.
They both have software 2.66 and 1000 base sx Mt-RJ port on front.
Connecting the two gigabit ports together just gets the status light to flash on and off every 2 seconds or so and no traffic flow.
Is what i'm trying to do feasible and if so, has anyone got any idea of the problem?
Ta,
Rich