We would like to connect our 61C (4.5) at our main campus to our newly acquired 11c (3.0) at our distribution/disaster recovery center which is 7 miles away. Private fiber has been installed (very expensive by the way) to connect the two locations.
What are my options to tie the two switches together?
I wanted to use the spare TMDI T1 Multipurpose Digital Interface card (NTRB21) in the 11c and one of my Dual PRI cards in the 61C. Then use a T1 Copper to fiber extender modem to convert to fiber and back - or
Can I use the Dual PRI card or do I also need a NTRB21 in the 61C?
What other things do I need to do. Would I build a tie route just like I would if we were using a T1 from AT&T? We would like to use 4 digit dialing between locations.
What are my options to tie the two switches together?
I wanted to use the spare TMDI T1 Multipurpose Digital Interface card (NTRB21) in the 11c and one of my Dual PRI cards in the 61C. Then use a T1 Copper to fiber extender modem to convert to fiber and back - or
Can I use the Dual PRI card or do I also need a NTRB21 in the 61C?
What other things do I need to do. Would I build a tie route just like I would if we were using a T1 from AT&T? We would like to use 4 digit dialing between locations.