Connecting BCCIII control card to sx200 icp mx

[Laylobrown]

2 T1's run B8ZS ESS and need to BCCIII Card. Do not have a T1/E1 module for ip.

Using per nodes.

Any suggestions on how to make this work without changing the actual T1's which take up to 30-45 days according to the service provider.

 

[Laylobrown]

Sorry for the typo, basically we moved the bay controllers from one building to another and it seems now that the ts will not run correctly on the cards. we have a 3300 handling them now.

The 200 icp mx doesnt have the t1/e1 cards but the bay cards are not syncing up with the t1.

What is the correct configuration for a setup such as this?