Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CONNECTING A SECOND REMOTE SITE 1

Status
Not open for further replies.

R2M3A

Technical User
Mar 14, 2023
10
BJ
HELLO EVERYBODY

I HAVE IP PHONES INSTALLED AT REMOTE SITE CONNECTED WITH A NS500 AT THE HEAD OFFICE. NOW THE COSTUMER WANT TO BE CONNECTED TO A SECOND SITE AND I TELL HIM IT'S POSSIBLE . DID I TELL TRUE OR NOT?

THANKS FOR YOUR HELP
 
HELLO.
THANKS FOR YOUR REPLY. FOR THE FIRST SITE I USE MRG . AS IT'S THE SAME MAIN PABX I'LL USE FOR THE CONNECTION ? SO FOR THE SECOND SITE I'LL TOO.

THANKS
 
R2M3A said:
DID I TELL TRUE OR NOT?
It depends....

Which is the total quantity of IP-phones (KX-NT) and SIP-phones, that are connected to KX-NS500?
 
hello.

Actually i have only 4 ip-Phones (kx-nt)connected to the ns500. one localy and three at first remote site. i want to add five (5) IP or SIP phones at the second remote site.
THANKS
 
Well, KX-NS500 has an Activation Key for connecting up to 4 proprietary IP-phones (KX-NT) on it's board.
To connect more than 4 KX-NT phones you have to buy additional Activation Keys (KX-NSM5xx) or to upgrade your PBX's software to ver. 9.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top