Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Connecting a FreePBX to Mitel 3300

Status
Not open for further replies.

murcielag0

Technical User
Mar 22, 2018
38
CA
Hello,
I'm looking to connect a FreePBX with our current Mitel 3300.
Anyone done this before? any experience or FreePBX flavors that are suggested?
Any help would be great.. Thanks!
 

Simplest way would be to configure a SIP trunk between the two. You will need SIP trunk license on the Mitel 3300.
 
Thanks for responding.
I've actually setup the SIP trunk on the Mitel side, but can't seem to get connection between the two of them.
Was hoping to find an article or how to for some guidance.

When I call the ext created on the FreePBX I get ACCESS DENIED.(busy)

I'll keep plugging away.
 

I would check Class of service - make sure 'public network access via dpnss' is enabled - check on extension and the trunk class of service

Check phone class of restriction isn't blocked by class of restriction group in route for sip trunk.

So whatever digits access your sip trunk in ARS, will point to a route (or list that points to route) with a cor group. Check that cor group does not have your phone cor in it.
 
Access Denied is usually a COR restriction problem.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top