Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Connecting 2 4006 Switched Togethre
- Thread starter SAM2001eg
- Start date
Plug your fiber cables in and then enter the following set commands on each switch:
set trunk 1/1 on
set trunk 1/2 on
Once you do this one of the links will go into a blocking state and the other into a forwarding state; Of course this is the most basic setting.
Since there is not much information provided in this thread its hard to say what other steps you may need to take.
set trunk 1/1 on
set trunk 1/2 on
Once you do this one of the links will go into a blocking state and the other into a forwarding state; Of course this is the most basic setting.
Since there is not much information provided in this thread its hard to say what other steps you may need to take.
- Status
Similar threads
- Locked
- Question