Connected Network not Showing in Routing Table

[DavidAimes]

Hi Everyone,

I have a 3750 L3 with 3 VLAN interfaces configured. VLAN1 is up and up, and appears in the routing table as a directly connected network. VLAN 2 and 3 both show as the following:

VLAN2 is up, protocol is down.

They do not appear in the routing table?

Any ideas why?

Many thanks,

Daniel

 

[Infinity123]

I would go out on a limb and say, because you dont have any devices active in the other vlans. Its why it states that its down.