Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Connected Line Presentation

Status
Not open for further replies.

ihatedx

Technical User
Mar 11, 2008
9
GB
Hi,

When I make an outbound call from a handset the display changes to "ISDN".

I'm trying to get Connected Line Identification Presentation working but can't get the handset to display the number thats been dialled.

any help appreciated.

Many thanks

 
Hello

You should not need to do anything to get the called/connected
line ID to show. If the DX receives CLI it displays it. It sounds like the carrier is not sending CLI, though they may deny that. If you can use the TRMB command you can prove this.

cheers
 
Hi,

This is the output from trwm:

?trqm 0120
28/05/08 10:09:25
< 0120 - 08 002:0:0098 SETUP
bearer capability (003) 80 90 A3
chan id (003) 10100001 10000011 005
calling p.n (006) 00 83 7441
called p.n (002) 80 0
low layer comp (003) 80 90 A3
28/05/08 10:09:25
> 0120 - 08 002:1:0098 SETUP ACK
chan id (003) 10101001 10000011 005
28/05/08 10:09:26
< 0120 - 08 002:0:0098 INFO
called p.n (002) 80 1
28/05/08 10:09:27
< 0120 - 08 002:0:0098 INFO
called p.n (002) 80 4
28/05/08 10:09:28
< 0120 - 08 002:0:0098 INFO
called p.n (002) 80 4
28/05/08 10:09:29
< 0120 - 08 002:0:0098 INFO
called p.n (002) 80 4
28/05/08 10:09:31
< 0120 - 08 002:0:0098 INFO
called p.n (002) 80 8
28/05/08 10:09:31
< 0120 - 08 002:0:0098 INFO
called p.n (002) 80 5
28/05/08 10:09:31
< 0120 - 08 002:0:0098 INFO
called p.n (002) 80 0
28/05/08 10:09:31
< 0120 - 08 002:0:0098 INFO
called p.n (002) 80 0
28/05/08 10:09:32
< 0120 - 08 002:0:0098 INFO
called p.n (002) 80 8
28/05/08 10:09:32
< 0120 - 08 002:0:0098 INFO
called p.n (002) 80 6
28/05/08 10:09:37
> 0120 - 08 002:1:0098 CALL PROC
28/05/08 10:09:38
> 0120 - 08 002:1:0098 ALERT
progress ind (002) 80 88
28/05/08 10:09:49
> 0120 - 08 002:1:0098 CONN
28/05/08 10:09:49
< 0120 - 08 002:0:0098 CONN ACK
28/05/08 10:09:57
< 0120 - 08 002:0:0098 DISC
cause (002) type=81 value=016
28/05/08 10:09:57
> 0120 - 08 002:1:0098 REL
28/05/08 10:09:57
< 0120 - 08 002:0:0098 REL COM

The call connects but the display on the phone changes to ISDN when the call connects.
 
There is no CLI in the trace which is why none is displayed.
 
Number dialled is 01444850086 if I'm not mistaken. Try and dial the number with the handset on hook and then press the speaker button/handsfree and see what you get. Have you got a name against the trunk main group, TG?
 
You were correct, the problem is the connected line isnt being passed to the DX, thanks for the help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top