Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ConnectComputer Fails

Status
Not open for further replies.

NullOp

Programmer
Jan 2, 2004
81
US
Just brought up a new 2003 server. When trying to connect using http:/<servername>/connectcomputer it fails. No messages, it just fails. Suggestions?

"Life Is Good!
 
It sounds like you're having problems joining the domain from a client/user system.

Just to double check, you're using the servers IP as the clients DNS?

Also you're sure you're trying //servername/connectcomputer and not //serverIP/connectcomputer using the IP has always failed in my experience.

Lastly check that the browser doesn't use a pop up blocker.
Each client will probably need to install software from the server and if you've a pop up blocker enabled it could be preventing that window from surfacing thus preventing the software from being installed.

Let us know how you progress...
 
How is hte client machine getting its IP & DNS settings? Is the workstation using the SBS box's IP for it's DNS (it should).

Pat Richard, MCSE(2) MCSA:Messaging, CNA(2)
 
I am running rather than using the IP address. The clients DNS is setup to the SBS IP address. The client is set to a static IP address. The browser does not have a popup blocker running.

More suggestions?

"Life Is Good!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top