Connect PRI to LEGEND from DMS 100 Central Office 4

[1Jumbo]

There have been numerous posts about getting "AT&T Custom" to work with a DMS 100 central office. Some of those posts suggested setting the DMS to U-459 protocol. Our recent experience was that this setting did not work. Fortunately, we had a service provisioner that would not quit trying. The actual setting was N-459. It turns out, U-459 is the USER side, N-459 is the NETWORK side. The LEGEND is the U-459 end and the DMS has to be set to N-459.

I hope this saves someone hours/days of fighting with the service provider. Once it was set correctly, it worked like gangbusters.

 

[SYQUEST]

Now if we could get the authors of the FAQs to update them for PRI, that would be even better. That would make it easier for those that need that information.

You deserve a star for your post.

....JIM....

 

[1Jumbo]

Working together we are smarter than any one of us. Thanks for the star.

If we as a group can post useful discovered information, it will help everybody. Putting the right words in the subject line helps find the article when someone needs it.

 

[comdata]

Thank you, that was very helpful

Alex