Connect Ipoffice 6.0.8 to Definity G3r9

[MTSTEK]

I need help connecting a Ipoffice 6.0.8 to a Definity G3r9.
Ipoffice has PRI card and Definity has tn747 with a 120a3 csu module. I want the Ipoffice to use the lines from the definity to call out on. and i want the caller id to pass back and forth between the two.

 

[kwing112000]

Do you have QSIG on the definity? Do you have voice networking licenses on the IPO?

Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries

 

[Westi]

https://support.avaya.com/css/P8/documents/003816439

you might want to try this, it is a bit older but still in good shape.

Joe W.

FHandw., ACSS

insanity is just a state of mind

 

[Westi]

https://support.avaya.com/css/P8/documents/100091879

this is a new document from une 2010 it might be better or worse as it is written for CM r6

Joe W.

FHandw., ACSS

insanity is just a state of mind

 

[MTSTEK]

No, i do not have QSIG.

Yes, i do have a Networking License.

 

[Westi]

I repeat

https://support.avaya.com/css/P8/documents/003816439

Joe W.

FHandw., ACSS

insanity is just a state of mind

 

[MTSTEK]

This document doesnt apply since the Definity is an older release of G3i r009. There is no UDP in the Definity.