luggageman
Technical User
I have a bcm50 and I want to connect to the CallPilot Manager, I plugged the unit into the ethernet port on the back of my router but I cannot connect. Any suggestions, I'm not very good at this networking issues.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Connect BCM50 to Linksys router
- Thread starter luggageman
- Start date
- Status
By default the BCM 50 gets its IP adddress from a DHCP server. If your Linksys is giving out DHCP, then you'll have a hard time knowing what IP is on your BCM.
Plug your laptop into the leftmost port on the BCM 50 - it will give your laptop a DHCP address and you can then use Element Manager to connect the BCM and assign an IP address.
Plug your laptop into the leftmost port on the BCM 50 - it will give your laptop a DHCP address and you can then use Element Manager to connect the BCM and assign an IP address.
- Thread starter
- #3
luggageman
Technical User
Thanks, I used 192.168.1.2 and connected through my router. I used the Ethernet port #2 on the BCM50. Thanks for the help.
- Status
Similar threads
- Question
- Question