Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Confirming Data From LIST TRACE TAC

kulabird

Technical User
Jan 13, 2010
49
US
Greetings:

My CM 8.1 has changed carriers and we setup new ISDN PRI trunks to a Cisco CUCM acting as my central office switch. I have test number 477-7777 which is reachable from the outside world to my internal station 77777. But using 'list trace tac' the dial number shows as 847-7777. What is causing this?

NOTES:
CUCM sends me 7 digits.
My internal station numbering is 5 digits.
No digit manipulation on trunk group page 2. No change in routing if I try to strip the first 2 incoming digits and replace with 47.
Incoming call handling treatment only looks for 477 numbers and strips 2 digits.
No change if I look for 847 numbers and route to other working numbers.

ADDITIONAL COMMENTS
I do not remember if the old trunks did the same. The old TRUNK GROUP and INCOMING CALL HANDLING do not have any odd digit manipulation - I did not catch this until we fully changed carriers.
Am I not interpreting list trace correctly?
Is there another digit manipulation which alters digits I am missing?
 

Part and Inventory Search

Sponsor

Back
Top