Configuring Samba: "the network path was not found"

[hornet77]

Hi,

I set up Samba on a RH8 box. From the Linux side I can log in as a samba user and access the shares.

When I go to a Windows box (Win2k), I go to the 'network neighborhood' and find the machine (linux) that Samba is on. When I double-click on the computer, it give me an hourglass for a while, then comes back and says:

\\my_linux_samba_machine is not accessible.
The network path was not found.

Any ideas?

 

[santoshdj123]

add samba users.

 

[hornet77]

Did that.

 

[smah]

Is there any firewall running on the RH machine?

 

[mattjurado]

Have you created both linux and samba users? If so, do you have a properly defined share(s)? Can you view anything view smbclient?

If these fail to lead you to the problem, post back smb.conf, but I believe smbclient is a good test to tell you samba is offering up stuff properly for smb clients to use.

Matt J.

Please always take the time to backup any and all data before performing any actions suggested for ANY problem, regardless of how minor a change it might seem. Also test the backup to make sure it is intact.

 

[santoshdj123]

Try to mount windows shared folder from linux.
mount -t smbfs -o username=username,password=passwd //192.168.1.2/shfolder /mnt/cdrom
if thiis is successful then something is wrong with samba users.
first create one linux server
# useradd oneuser
#passwd oneuser
New password :
Retype new password :
# smbpasswd -a oneuser

now give same password which u gave for linux user ( oneuser)

 

[mrmac228]

What is security set to in smb.conf?

I love deadlines. I like the whooshing sound they make as they fly by - Douglas Adams

 

[santoshdj123]

security = user

 

[bluegroper]

Maybe

http://www.tek-tips.com/threadminder.cfm?spid=865

 

[hornet77]

Sorry for the delay, I had a long weekend...To answer your questions...

smah-No FW's running on the box.

mattjurado-I have created both linux and samba users and I can log in using smbclient on the linux side and get to the shares that reside on the linux box...just not from windows machines.

santoshdj123-the share is on the linux box.

mrmac228/santoshdj123-security is currently set to "domain", but I've had it set for "user" before and it didn't work either.

I'm wondering if this has anything to do with the Windows Domain Controller? I'm not by any means a Windows guru and I'm not sure if anything needs to be set up differently on the Windows side. Just to recap, the Linux box is where the Samba shares reside. I can't get to these shares from a Windows machine, but I can from a Linux machine.

Thanks to all of you for all of your help and I appreciate any new ideas!

 

[mattjurado]

Windows domain controller? Hmmm... Are the workstations pointing to that computer for DNS?

Try going to start, find, files or folders. Tell it to search for computers, and type in the lan ip address of the samba server. Can you browse its resources that way?

Matt J.

Please always take the time to backup any and all data before performing any actions suggested for ANY problem, regardless of how minor a change it might seem. Also test the backup to make sure it is intact.

 

[hornet77]

It did not find the computer that way. What steps need to be taken now? Do I need to get the Windows guy here to add it to the domain? (I thought I already did that) Is there anything that would need to be done?

 

[mattjurado]

Can you ping the samba server?

Matt J.

Please always take the time to backup any and all data before performing any actions suggested for ANY problem, regardless of how minor a change it might seem. Also test the backup to make sure it is intact.

 

[hornet77]

Yes.

 

[mattjurado]

post your smb.conf, and again, let me know what handles the name resolution on your network (i.e. windows 2000 running dns, samba running wins, etc...)

Matt J.

Please always take the time to backup any and all data before performing any actions suggested for ANY problem, regardless of how minor a change it might seem. Also test the backup to make sure it is intact.

 

[hornet77]

Ok, here's the output from the 'testparm' (names and ip's have been changed):

Load smb config files from /etc/samba/smb.conf
Processing section "[homes]"
Processing section "[netlogon]"
Processing section "[printers]"
Processing section "[tmp]"
Loaded services file OK.
Press enter to see a dump of your service definitions
# Global parameters
[global]
coding system =
client code page = 850
code page directory = /usr/share/samba/codepages
workgroup = <my domain>
netbios name = <my hostname>
netbios aliases =
netbios scope =
server string = Samba Server
interfaces =
bind interfaces only = No
security = DOMAIN
encrypt passwords = Yes
update encrypted = No
allow trusted domains = Yes
hosts equiv =
min passwd length = 5
map to guest = Never
null passwords = No
obey pam restrictions = Yes
password server = *
smb passwd file = /etc/samba/smbpasswd
root directory =
pam password change = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *New*password* %n\n *Retype*new*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
passwd chat debug = No
username map =
password level = 0
username level = 0
unix password sync = Yes
restrict anonymous = No
lanman auth = Yes
use rhosts = No
admin log = No
log level = 0
syslog = 1
syslog only = No
log file = /var/log/samba/%m.log
max log size = 0
timestamp logs = Yes
debug hires timestamp = No
debug pid = No
debug uid = No
protocol = NT1
large readwrite = No
max protocol = NT1
min protocol = CORE
read bmpx = No
read raw = Yes
write raw = Yes
nt smb support = Yes
nt pipe support = Yes
nt status support = Yes
announce version = 4.5
announce as = NT
max mux = 50
max xmit = 65535
name resolve order = lmhosts host wins bcast
max packet = 65535
max ttl = 259200
max wins ttl = 518400
min wins ttl = 21600
time server = No
unix extensions = No
change notify timeout = 60
deadtime = 0
getwd cache = Yes
keepalive = 300
lpq cache time = 10
max smbd processes = 0
max disk size = 0
max open files = 10000
read size = 16384
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
stat cache size = 50
use mmap = Yes
total print jobs = 0
load printers = Yes
printcap name = /etc/printcap
disable spoolss = No
enumports command =
addprinter command =
deleteprinter command =
show add printer wizard = Yes
os2 driver map =
strip dot = No
mangling method = hash
character set =
mangled stack = 50
stat cache = Yes
domain admin group =
domain guest group =
machine password timeout = 604800
add user script =
delete user script =
logon script =
logon path = \\%N\%U\profile
logon drive =
logon home = \\%N\%U
domain logons = No
os level = 33
lm announce = Auto
lm interval = 60
preferred master = Auto
local master = No
domain master = Auto
browse list = Yes
enhanced browsing = Yes
dns proxy = No
wins proxy = No
wins server =
wins support = No
wins hook =
kernel oplocks = Yes
lock spin count = 3
lock spin time = 10
oplock break wait time = 0
add share command =
change share command =
delete share command =
config file =
preload =
lock dir = /var/cache/samba
pid directory = /var/run/samba
utmp directory =
wtmp directory =
utmp = No
default service =
message command =
dfree command =
valid chars =
remote announce =
remote browse sync =
socket address = 0.0.0.0
homedir map = auto.home
time offset = 0
NIS homedir = No
source environment =
panic action =
hide local users = No
winbind uid =
winbind gid =
template homedir = /home/%D/%U
template shell = /bin/false
winbind separator = winbind cache time = 15
winbind enum users = Yes
winbind enum groups = Yes
winbind use default domain = No
comment =
path =
alternate permissions = No
username =
guest account = nobody
invalid users =
valid users =
admin users =
read list =
write list =
printer admin =
force user =
force group =
read only = Yes
create mask = 0744
force create mode = 00
security mask = 0777
force security mode = 00
directory mask = 0755
force directory mode = 00
directory security mask = 0777
force directory security mode = 00
force unknown acl user = 00
inherit permissions = No
inherit acls = No
guest only = No
guest ok = No
only user = No
hosts allow = <my subnets>. 192.168.1. 192.168.2. 127.
hosts deny =
status = Yes
nt acl support = Yes
block size = 1024
max connections = 0
min print space = 0
strict allocate = No
strict sync = No
sync always = No
write cache size = 0
max print jobs = 1000
printable = No
postscript = No
printing = lprng
print command = lpr -r -P%p %s
lpq command = lpq -P%p
lprm command = lprm -P%p %j
lppause command =
lpresume command =
queuepause command =
queueresume command =
printer name =
use client driver = No
default devmode = No
printer driver =
printer driver file = /etc/samba/printers.def
printer driver location =
default case = lower
case sensitive = No
preserve case = Yes
short preserve case = Yes
mangle case = No
mangling char = ~
hide dot files = Yes
hide unreadable = No
delete veto files = No
veto files =
hide files =
veto oplock files =
map system = No
map hidden = No
map archive = Yes
mangled names = Yes
mangled map =
browseable = Yes
blocking locks = Yes
csc policy = manual
fake oplocks = No
locking = Yes
oplocks = Yes
level2 oplocks = Yes
oplock contention limit = 2
posix locking = Yes
strict locking = No
share modes = Yes
copy =
include =
exec =
preexec close = No
postexec =
root preexec =
root preexec close = No
root postexec =
available = Yes
volume =
fstype = NTFS
set directory = No
wide links = Yes
follow symlinks = Yes
dont descend =
magic script =
magic output =
delete readonly = No
dos filemode = No
dos filetimes = No
dos filetime resolution = No
fake directory create times = No
vfs object =
vfs options =

[homes]
comment = Home Directories
valid users = %S
read only = No
create mask = 0664
directory mask = 0775

[netlogon]
comment = Network Logon Service
path = /usr/local/samba/lib/netlogon
guest ok = Yes
share modes = No

[printers]
comment = All Printers
path = /var/spool/samba
printable = Yes
browseable = No

[tmp]
comment = Temporary file space
path = /ftp
valid users = cramsey
read only = No
guest ok = Yes

and here's the smb.conf (again, names and ip's have been changed):

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = <my domain name>
netbios name = <my hostname>

# server string is the equivalent of the NT Description field
server string = Samba Server

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
hosts allow = <my subnets>. 192.168.1. 192.168.2. 127.

# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
printing = lprng

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log

# Put a capping on the size of the log files (in Kb).
max log size = 0

# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = domain

# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
password server = *
; password server = <NT-Server-Name>

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd

# The following is needed to keep smbclient from spouting spurious errors
# when Samba is built with support for SSL.
; ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt

# The following are needed to allow password changing from Windows to
# update the Linux system password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
unix password sync = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *New*password* %n\n *Retype*new*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*

# You can use PAM's password change control flag for Samba. If
# enabled, then PAM will be used for password changes when requested
# by an SMB client instead of the program listed in passwd program.
# It should be possible to enable this without changing your passwd
# chat parameter for most setups.

pam password change = yes

# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m

# This parameter will control whether or not Samba should obey PAM's
# account and session management directives. The default behavior is
# to use PAM for clear text authentication only and to ignore any
# account or session management. Note that Samba always ignores PAM
# for authentication in the case of encrypt passwords = yes

obey pam restrictions = yes

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24

# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no

#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = yes
writable = yes
valid users = %S
create mode = 0664
directory mode = 0775
# If you want users samba doesn't recognize to be mapped to a guest user
; map to guest = bad user


# Un-comment the following and create the netlogon directory for Domain Logons
[netlogon]
comment = Network Logon Service
path = /usr/local/samba/lib/netlogon
guest ok = yes
writable = no
share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes

# This one is useful for people to share files
[tmp]
comment = Temporary file space
path = /ftp
read only = no
public = yes
writable = yes
printable = no
valid users = cramsey
browseable = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff

# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /home/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/local/pc/%m
; public = no
; writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765

DNS at our site is being by a Solaris box. We have a Windows 2000 Domain controller on the Windows side of the house. I'm not sure how to make these guys play nice with one another...