Configuring Pri to accept incoming BRI calls

[TechTryer]

I have a Cisco 2651XM router with a Channelized T1/E1 card for my ISDN PRI. I need to figure out how to accept incoming calls from BRI and assign them to a specific dialer profile. The reason being i would like each site with a BRI to have a specific Dialer Map. Do u guys have any idea how to go about this?

I have some configs which i tested but it does not seem to know which is the correct dialer profile to choose. As a result, it keeps connecting and disconnecting.

Cheers
Techtryer

<! All you can do is do your best !>
<! All i can do is do better than my best !>

TechTryer
<-- All we can do is do our Best -->

 

[CiscoFreakazoid]

Use loopback interfaces!