Configuring Outbound NAT

[BSMKING]

FireBox II
WatchGuard Version 7.0x

I have 5 public IPs and 5 servers behind the firebox on a 192.168.1.0/24 subnet. Each server has a dedicated service running such as DNS, FTP, WWW, etc. etc.

When I configure my Inbound Services such as DNS for all connections to Public IP ? goto Private IP it works great.

My question is how do I make all traffic coming from a private IP route through a specific public IP?

Example:

Incoming:
111.111.111.111 -> 192.168.1.6

Outgoing:
192.168.1.6 -> 111.111.111.111

So what that means is anything coming from 192.168.1.6 will act like its coming from my 111.111.111.111 public IP. And so forth.

So I guess it would be how do I configure outbound NAT since I have inbound NAT down.

Thanks in advance
-King

 

[imheywood]

You need to configure a One-to-One NAT. In policy Manager go to Setup and NAT. In there select Advanced and the 1-to-1 NAT tab. This is as far as i go as i have never actually done a 1-to-1 NAT.
If you go to watchguards website they have guides on to do this in detail. Also become a memeber of watchguard's web forums, they give some great tips and you will get more answers to your problems.